 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Document 240-1 1008PS Inductors for xDSL Filters Coilcraft's new 1008PS Series is ideal for use in a variety of filters, including the data separation filters used in VDSL and ISDN/ADSL implementations. They measure just 2.74 mm high and have very low DC resistance to reduce insertion loss. The specially designed ferrite cover provides magnetic shielding and the best possible surface for pick and place handling. Coilcraft offers reference designs for various xDSL filters using these and other surface mount components. We can also provide several complete low pass and band pass filter modules in space-saving SIP configurations. Coilcraft Designer's Kit C141 contains six samples each of the standard parts shown. To order, contact Coilcraft or visit http://order.coilcraft.com. DCR4 SRF5 Part L 10%2 Q min3 max typ 1 number1 (H) @ 1 MHz (Ohms) (MHz) 1008PS-102K_ 1.0 35 0.05 344 1008PS-152K_ 1.5 35 0.06 260 1008PS-182K_ 1.8 35 0.09 225 1008PS-272K_ 2.7 38 0.14 185 1008PS-392K_ 3.9 38 0.26 175 1008PS-472K_ 4.7 38 0.35 160 1008PS-562K_ 5.6 38 0.36 150 1008PS-682K_ 6.8 38 0.58 120 1008PS-103K_ 10 38 0.92 105 1008PS-153K_ 15 38 1.15 35 1008PS-223K_ 22 40 1.40 26 1008PS-333K_ 33 45 1.61 20 1008PS-393K_ 39 45 1.85 16 1008PS-473K_ 47 45 2.5 19 1008PS-683K_ 68 45 3.8 12 1008PS-823K_ 82 45 4.3 9.0 1008PS-104K_ 100 45 5.8 7.0 1008PS-124K_ 120 50 6.3 7.0 1008PS-154K_ 150 50 7.5 5.8 1008PS-224K_ 220 55 10.0 10.0 1008PS-334K_ 330 55 11.5 3.8 1008PS-474K_ 470 55 16.3 3.1 1008PS-564K_ 560 55 18.1 2.8 1008PS-684K_ 680 55 24.0 2.5 1008PS-824K_ 820 45 26.0 1.5 1008PS-105K_ 1000 45 29.0 2.0 Isat6 (A) 3.0 2.8 2.1 1.3 1.2 1.0 1.0 0.84 0.78 0.70 0.65 0.51 0.45 0.40 0.31 0.30 0.30 0.25 0.22 0.22 0.20 0.16 0.13 0.12 0.10 0.10 Irms7 (A) 2.00 2.00 1.90 1.60 1.20 1.10 0.90 0.80 0.72 0.60 0.55 0.50 0.47 0.42 0.32 0.30 0.30 0.28 0.26 0.21 0.19 0.18 0.15 0.14 0.12 0.11 1. Specify packaging code: 1008PS-105KC C = 7 machine-ready reel. EIA-481 embossed plastic tape (750 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13 machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (2500 parts per full reel). 2. Inductance measured at 100 kHz, 0.1 Vrms, using Coilcraft SMD-A fixture in Agilent/HP 4263B impedance analyzer. 3. Q measured on Agilent/HP 4291 with Agilent/HP 16193 test fixture. 4. DCR measured on micro-ohmmeter and Coilcraft CCF840 test fixture. 5. SRF measured using Agilent/HP 8753D network analyzer and Coilcraft SMD-D test fixture. 6. DC current at which the inductance drops 10% (typ) from its value without current. 7. Average current for a 40C rise above 25C ambient. 8. Operating temperature range -40C to +85C. 9. Electrical specifications at 25C. See Qualification Standards section for environmental and test data. Packaging: Specifications subject to change without notice. Document 240-1 Revised 03/27/03 Document 240-2 1008PS Inductors for xDSL Filters Typical L vs Frequency Typical L vs Current B F C D A E G Terminal wraparound: approx 0.015/0,38 both ends H I J I Recommended Land Pattern A max B max C max D max E max F max G max 0.150 3,81 0.150 3,81 0.108 2,74 0.070 1,78 0.100 2,54 2,11 0,51 H I J 1,27 0.083 0.020 0.100 0.040 0.050 2,54 1,02 Parts/reel: 7 750; 13 2500 Tape width: 12 mm For packaging data see Tape and Reel Specifications section. Specifications subject to change without notice. Document 240-2 Revised 03/06/03 |
Price & Availability of X1008PS
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |